Tradestation User Group Germany (http://www.tradernet.org/wbb/index.php)
|- Posts aus dem alten Userforum (http://www.tradernet.org/wbb/board.php?boardid=15)
|-- RAVI (http://www.tradernet.org/wbb/threadid.php?boardid=15&threadid=141)


Geschrieben von _harami am 04.12.2001, 13:10:

  RAVI

Hallo zusammen,

kann mir jemand eine Seite nennen wo ich den
EL Code für den RAVI herbekomme oder kann ihn
jemand hier reinstellen. Danke


Geschrieben von _broker am 04.12.2001, 14:10:

  RE: RAVI

Schau mal unter www.techdataresearch.de bei Indikatoren vorbei.


Geschrieben von _Mike am 04.12.2001, 14:10:

  RE: RAVI

75€ for a simle MA s Difference Indikator, not bad ...

This is directly from Chande s book. It s not a filter, still I hope this helps!

SNIP

An indicator that is more directly based on market momentum, and that responds more predictably than the ADX, is the range action
verification index (RAVI). This strategy, which focuses on identifying ranging markets, is different from the ADX, which looks at
how much of today s price action is beyond yesterday s price bar.

To define RAVI, we begin by selecting the 13-week simple moving average, since it represents a quarter of a year. Because we want to
use daily data, we convert the 13-week SMA into the equivalent 65-day SMA of the close. This is the long moving average. The short
moving average is chosen as only 10 percent of the long moving average, which is 6.5 days, or, rounding up, 7 days. Thus, we use
7-day and 65-day simple moving averages. This choice of lengths is purely arbitrary. Next, the RAVI is defined as the absolute value
of the percentage difference between the 7-day SMA (7-SMA) and the 65-day SMA (65-SMA):

RAVI = Absolute value (100 x (7 day SMA-65 day SMA)/65 day SMA)

An arbitrary reference level of 3 percent means a market is ranging if the RAVI is less than 3 percent, and trending strongly if the
RAVI is greater than 3 percent. In some markets, such as Eurodollars, this is too high a hurdle. Hence, you may want to experiment
with a smaller level, such as 1 percent, or use a relative measure, such as a 65-day SMA of the RAVI. You can also require that the
RAVI be above 3 percent and rising there to be a strong trend.

Note the following design features of the RAVI: (1) There is only one level of smoothing. (2) The 7-day moving average is relatively
sensitive, so that the lags between price action and indicator action should be small. (3) Markets can still move more quickly than
the RAVI indicates. You can verify this by looking at the currency markets. (4) Markets in a slowly drifting, choppy trend will pin
the RAVI below 3 percent, indicating ranging action.

SNIP


Geschrieben von _Donald$ am 04.12.2001, 16:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen... im

webn kannst Du mal unter TRADESTATION OMEGA
u.ä. suchen.
Dann findest Du EL-Indik. bis zum abwinken.
Schwer wirds nur mit dem >holy grail
Dona$d


Geschrieben von _harami am 04.12.2001, 20:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen... im

Damit habe ich schon Stunden verbracht. Habe aber nie das gefunden
was ich suchte. Ausser gegen Bezahlung für ein ganzes Paket von
Indikatoren. Vielleicht kann den Ravi ja doch jemand reinstellen.


Geschrieben von _Jack am 04.12.2001, 21:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen... im

RAVI (range action verification index)


Here s the formula for RAVI (range action verification index), which acts
like ADX in that it supposed to identify trends (e.g. RAVI > 3). Mr. Chande
uses 5 periods for the fast MA and 65 periods for the slow MA.


D1= "FAST MA"
E1= you pick the number of periods for the fast Moving Average (Chande uses
5)

D2= "SLOW MA"
E2= you pick the number of periods for the slow Moving Average (Chande uses
65)

A1= "Date"
A2= Day 1 s date
A3= Day 2 s date and so forth

B1= "Close"
B2= Day 1 closing price
B3= Day 2 closing price and so forth

C1= "RAVI"
C2= =
IF(OFFSET(E2,-$E$2+1,0,)=$E$1,0,ABS(100*(((SUM(OFFSET(C3,-$E$1,-1,$E$1,1))/$
E$1)-(SUM(OFFSET(C3,-$E$2,-1,$E$2,1))/$E$2))/(SUM(OFFSET(C3,-$E$2,-1,$E$2,1)
)/$E$2))))
E4:Ex Copy E3 s formula



Geschrieben von _Jack am 04.12.2001, 21:10:

  RE: Excel!

..


Geschrieben von _Uwe am 04.12.2001, 22:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen... im

EL-Code für RAVI-Indikator (ungeprüft)



INPUT: Price(close), LenAv1(7), LenAv2(65), Level(3);
vars: GD1(0), GD2(0), RAVI(0);

GD1=Average(Price, LenAv1);
GD2=Average(Price, LenAv2);

RAVI = 100*AbsValue((GD1-GD2)/GD2);

plot1(RAVI,"RAVI");
plot2(Level,"Level");


nach: http://www.trading-konzepte.de/indikator/ravi.htm


Geschrieben von _harami am 04.12.2001, 23:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen... im

Funktioniert. Danke. Du hast doch schon mal den Chaikin Money Flow
gepostet. Hast Du auch dessen Vola Indikator? Und vielleicht den
Standard Deviation? und und und...


Geschrieben von _Monika am 05.12.2001, 00:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen...

WAS ICH NICHT KANN

Was ich kann
weiß ich noch nicht

Was ich weiß
kann ich noch nicht ganz

Was ich will
weiß ich schon

Was ich mir wünsche
kann ich nicht alleine schaffen

Oder doch?


Geschrieben von _Uwe am 05.12.2001, 09:10:

  Möglich, dass ich Deine Anfrage falsch verstanden habe, hamari...

Hallo hamari!

Vielleicht haben wir unterschiedliche Vorstellungen von einem Forum. Meine gehen dahin, dass es ein Platz des Austauschs nicht des Abrufs ist. Vielleicht ist aber auch nur Dein Humor bei mir nicht richtig angekommen.

Sollte es Dir also nicht möglich sein, Dich mit EL zu beschäftigen, und als kleine, für Einsteiger nachvollziehbare Anregung sollen meine einfachen Beispiele von EL-Befehlszeilen nur dienen, dann bitte ich Dich, auf entsprechende Dienste auszuweichen.

Gern werde ich auch weiterhin bereit sein Fragen zu beantworten oder aber auch Hilfestellung zu geben, würde es jedoch als Anerkennung empfinden, wenn derlei Übungen, wie eben die Programmierung des RAVIs, als Grundlage zur selbständigen Einarbeitung benutzt werden. Darauf aufbauend lassen sich bestimmt auch für den Einsteiger schnell weitere Erkenntnisse zur Eigenentwicklung entnehmen.

Uwe



Geschrieben von _harami am 05.12.2001, 09:10:

  RE: RAVI MIKE hat Dir ja hierzu schon geholfen...

Du hast es natürlich geschafft dir alle Indikatoren selbst zusammen
zu suchen oder zu Programmieren. Schon klar. Ich kann im Internet
jedenfalls nicht die gewünschten Indikatoren finden und bin deshalb
auf die Hilfe anderer angewiesen. Gruß


Geschrieben von _harami am 05.12.2001, 10:10:

  RE: Möglich, dass ich Deine Anfrage falsch verstanden habe, hamari...

Hab zwar wenig Zeit aber du hast Recht. Werde es versuchen.

Powered by: Burning Board 1.1.1 © 2001 by WoltLab